Floor-supported garage shelving is another site-built option. One method for constructing these is to form upright supports by running vertical 2x4 boards every 50 inches. Each 2x4 should rest on the floor and be attached to a rafter or ceiling joist at the top. Then, additional 2x4 boards are attached horizontally on edge between the uprights and particle board is used to create the shelf. Dimensions are usually 19-25 inches deep with 25 inches between each shelf. These are only suggested dimensions and can be adjusted to better accommodate the size of the items that will be stored.
Not only can you find some good looking corners shelves that could possibly hold your stereo speakers, but you can also find them in a floating shelf design. A floating shelf is just a shelf that attaches to the wall via a bracket that has two or three rods protruding outwards. The self simply slides onto the rods, and then locks in from an access screw or hex nut located on the bottom of the shelf.
Wall mounted shelves: these types of wall shelves can be mounted on any wall so that you can utilize them to keep your daily essentials.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does www.ids-usa.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.